Hebei Changtong Steel Structure Co., Ltd.
20 years of communication tower design and production experience
Provide comprehensive professional consulting services
Has served countless communication carriers
|Place of Origin:||China|
|Minimum Order Quantity:||1piece|
|Packaging Details:||Container transport, according to customer requirements for reasonable packaging, the general situation of the tower for metal reinforcement bind.|
|Payment Terms:||L/C, T/T, Western Union|
|Product Name:||Angle Steel Tower||Material:||Angle SteelQ345/Q235|
|Surface Treatment:||Hot-dip Galvanized||Height:||15m-80m/Customized|
|Wind Speed:||30m/s||Quantity Of Platform:||2/3/Customized|
|Antenna Type Of 4 Leg Angle Steel Tower:||GSM, RRU,CDMA, MW Etc.||Lifetime:||More Than 30 Years|
|Application:||Mobile Communication Tower|
gsm 4 legged tower,
bts 4 legged tower,
radar self supporting antenna tower
Outdoor 5G Telecom Microwave Antenna Galvanized 4-Legged Angular Steel Tower
The extension of the antenna support beyond the platform edge should not be greater than 800mm. When it exceeds 800mm, the antenna support should be designed into a retractable movable type.
The communication tower shall be equipped with anti direct lightning strike and secondary induction lightning devices
tThe design and construction of communication tower shall closely cooperate with the communication process to meet its requirements. The possibility of platform height, mast direction and antenna expansion shall be fully considered.
The maintenance platform should be set at the height of the hanging antenna of the steel tower. The width of the platform should consider the spacing requirements of the antenna, and the net width should not be less than 600mm. The platform should be provided with 1.1m railing; The fence shall be firm and reliable. The fence shall be made of angle steel of 50mm * 50mm * 5mm and above, and the angle steel shall be firmly connected with each other. When the height of the tower and mast is greater than 50m, a rest platform should be added in the middle.
|1. Design Code||AST-101|
|2. Grade||Mild Steel||High Tensile Steel|
|ASTM A36||ASTM A572 Gr50|
|EN10025: S235JR||EN10025: S355JR|
|3. Design Wind Speed||0-300KM/H|
|4. Allowable deflection||0.5 ~1.0 degree at operational speed|
|5. Tension strength (Mpa)||360~510||470~630|
|6. Yield strength (t≤16mm) (Mpa)||355||235|
|7. Elongation (%)||20||24|
|Bolts & Nuts|
|8. Grade||Grade 4.8, 6.8, 8.8|
|10. Standards for mechanical properties|
|10.1 Bolts||ISO 898-1|
|10.2 Nuts||ISO 898-2|
|10.3 Washers||ISO 6507-1|
|12. Standard||AWS D1.1|
|14. Galvanization standard of steel sections||ISO 1461 or ASTM A123|
|15. Galvanization standard of bolts and nuts||ISO 1461 or ASTM A153|
Price Term: EXW, FOB, CFR or CIF and so on
Shipping port: Tianjin port
Payment Term: Usually 50% by T/T as deposit balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.
Delivery Time: Usually 30-45 days after PO/drawing/prepayment confirmed.
Package: Normally we use steel wire to make the angle into bundle ,then use special material to protect the zinc, or according to client’s requirement.
Please provide drawings if you have so that we can calculate the accurate price for you.
We also provide design according to your requests, if you don't have drawings.
Contact Person: Anne Wang